Benro A673TM Dual-Tube Aluminum Tripod & S8Pro Head
The Benro A673TM Dual-Tube Aluminum Tripod & S8Pro Head combines the S8Pro Fluid Head, providing balanced support for loads up to 8 kg, and the A673TM Dual-Tube Aluminum Tripod, offering an efficient setup/breakdown workflow as well as stable support, gives you an effective solution for professional applications with most cameras. The tripod features a removable mid-level spreader and the head provides 7+0 steps of counterbalance and continuous pan and tilt drag.
The S8Pro head has a flat base with a 3/8"-16 thread on the bottom, allowing the versatility to move it from the tripod directly to other camera supports, such as sliders. The tripod is designed with a 75mm bowl and includes a half-ball adapter with a 3/8"-16 screw for incorporating the head. The tripod has rubber feet with dual spikes underneath for use on virtually all surfaces.
Combined, the 2-stage tripod and S8Pro head have a height range of 71 to 160 cm. The tripod is made of aluminium and the head of magnesium and aluminium, including its knobs. The head comes with a pan bar that can be attached to either side. It also offers two 3/8"-16 threaded holes for attaching articulating arms and other accessories.
The Benro A673TM Dual-Tube Aluminum Tripod & S8Pro Head Includes a Benro S8Pro Fluid Video Head
Note: Product is shown in use for illustration only, additional equipment not included.
Key Features of the Benro A673TM Dual-Tube Aluminum Tripod & S8Pro Head
- 8 kg payload
- 75mm flat base with a 3/8"-16 thread
- Compatible with 75mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
- 7+0 steps of counterbalance
- Continuous pan and tilt drag
- Independent pan and tilt locks
- +90/-75° tilt range
- 360° pan range
- Made of magnesium and aluminium
- Rosette adapters on the left and right side for attaching the included pan bar
- Sliding camera plate with safety lock
- 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
- Two 3/8"-16 threaded holes for accessories
- 75mm bowl
- Includes a half-ball adapter with a 3/8"-16 screw
- Rubber feet with dual spikes
- Removable mid-level spreader
- Height range 71 to 160 cm with the head attached
Benro S8Pro Fluid Video Head
The Benro S8 Pro Fluid Video Head is a versatile fluid video head for loads up to 8 kg. Featuring a 75mm flat base with a 3/8"-16 threaded hole, it can efficiently be moved between compatible tripods and sliders, jibs, monopods, and other support gear. To balance your heavy loads, the S8Pro offers 7+0 steps of counterbalance adjustable via a knob on the side. Another knob on the opposite side provides control over continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°.
Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won’t slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there’s a 3/8"-16 threaded hole on each side of the head to which you can secure articulating arms.
Key Features of the Benro S8Pro Fluid Video Head
- 8 kg payload
- 75mm flat base with a 3/8"-16 thread
- Compatible with 75mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
- 7+0 steps of counterbalance
- Continuous pan and tilt drag
- Independent pan and tilt locks
- +90/-75° tilt range
- 360° pan range
- Made of magnesium and aluminium
- Rosette adapters on the left and right side for attaching the included pan bar
- Sliding camera plate with safety lock
- 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
- Two 3/8"-16 threaded holes for accessories
- MPN – A673TMBS8PRO
- GTIN – 6931747313082