3 Legged Thing – Pro 2.0 Leo Tripod Kit with AirHed Pro – Darkness
Offered here in matte black, the 3 Legged Thing Leo 2.0 Tripod with AirHed Pro Lever Ball Head provides a dynamic support system that features three detachable legs and a removable centre column. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to 110 cm in height or can be combined with the centre column to form a monopod with up to 150cm in height.
Tripod heads such as the AirHed Pro Lever Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Leo 2.0 Tripod. When combined and configured as a tripod, the Leo 2.0 Tripod and AirHed Pro Lever Ball Head support up to 30 kg and measure 37 cm when folded. Each of the tripod’s 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Leo 2.0 Tripod and AirHed Pro Lever Ball Head can be set at a minimum height of 20.8 cm when the tripod’s 2-section, the push-and-pull rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 112 cm or 46.6 cm with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.
For added versatility, the Leo 2.0 Tripod’s three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with a strap is provided for storage and transport
The AirHed Pro Lever Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head’s ball-and-socket joint by using the clamp’s push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever’s motion best suits either a right- or left-handed user.
Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations.
By loosening the ball head’s primary locking knob, the head’s ball-and-socket joint can be quickly swivelled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.
Key Features of the 3 Legged Thing Leo 2.0 Tripod with AirHed Pro Lever Ball Head
- Load Capacity: 30 kg
- Max Height: 46.6 cm, Min Height: 20.8 cm
- Folded Length: 37.3 cm
- Leg Sections: 5, Weight: 2 kg
- Carbon Fiber Legs, Bubble Level
- Twist Locks, Rubber Feet
- 3-Position Leg Angle Locks
- Reversible, Multi-Section Rapid Column
- Monopod-convertible legs and Column
- AirHed Pro Lever Ball Head, Arca-Type
Tripod and Ball Head
- Arca-type ball head and carbon-fibre tripod with 3/8"-16 mount
- Tripod features three detachable legs and a removable centre column
- With a ball head, each leg can be configured as a monopod with up to 37 cm height or can be combined with the centre column to form a monopod with up to 150.4 cm height
- Tripod configuration with ball head supports up to 30 kg
- Push-and-pull centre column for rapid camera, lens, or sport optic positioning
- Center column D-ring to accommodate ballast for additional stability
- Can be set for a minimum height of 55 cm or 20.8 cm without the centre column
- With a ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 112 cm or 146 cm with the centre column fully raised
- The centre column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod’s legs instead of above them
- Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
- Legs can be locked at 22, 55, or 80° angles
- Rubber feet help to enhance stability on a wide variety of surfaces
- Weighs 2 kg and measures 37 cm when all three legs are reversed 180° and folded
- Rubber feet can be removed and substituted with separately available 3-Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
- Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
- 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
- Ball head microfiber bag
- Tripod kit carry bag with a strap for storage and transport
AirHed Pro Lever Ball Head
- Arca-type ball head with 40 kg load capacity
- Compatible with tripods or support systems that feature a 3/8"-16 mount
- Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
- Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
- Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
- Secondary locking knob with knurled surface allows the head to rotate 360°
- Integrated clamp on top of the ball-and-socket joint is compatible with the included QR-OCTA
- Quick Release Plate
- Push-and-pull cam lock lever to secure compatible Arca-type quick-release plates within the integrated clamp
- When opened, the cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever’s motion best suits either a right or left-handed user
- Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations
- Durable magnesium alloy construction
QR-OCTA Quick Release Plate
- Compatible with Arca-type quick-release clamps
- 1/4"-20 mount
- Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Lever Ball Head
- Durable, aluminium alloy construction
- MPN – 3LT-LEOKITDARK2
- GTIN – 5060244886858
