Bluetti AC300 Power Station with B300 battery
The Bluetti AC300 Power Station with B300 battery is a modular solar power system with a capacity of 3072 Wh, which offers the possibility to expand with a maximum of 4x B300 modules to a capacity of 12,228 Wh. This way you can provide all your basic needs during off-grid adventures, during emergencies or as a back-up system at home. The B300 Battery Module is equipped with a LiFePO4 battery of 3500+ life cycles and is connected to the AC300 Power Station. When the AC300 is combined with the B300, the system can be controlled via Bluetooth or WiFi. This AC300 Power Station was developed without an integrated battery, so this AC300+B300 combo can only be used together. It is possible to use the B300 Module separately from the power station, so that you are always flexible.
Thanks to the two advanced solar inputs, each with a separate MPPT controller, a maximum of 2400 Watts of solar panels can be connected. If you also use the supplied mains adapter, you can charge the AC300+B300 (minimum 2 x B300) with 5400 Watts and the charging time is only 1.6 – 2.1 hours. When you use an AC300 + 1 x B300, the system can be charged with a maximum of 3000 W. (2400 W via solar + 600 W via AC or 3000 W via AC)
The AC300 Power Station has different outputs, such as USB-A, USB-C PD (100 W), Wireless charging (15W), 12V – 30A and 6x 230 V outputs. The six 230V outputs are suitable for charging electronic devices with a power of up to 3000 W and 6000 W peak load. This makes the AC300+B300 Power Station Combo suitable for charging/powering not only smartphones, tablets, laptops, drones, lighting, CPAP equipment, TVs and refrigerators, but also equipment with a higher power. Think, for example, of coffee makers, camping kettles, air conditioners and water pumps. In order to generate more power than 3000 W, several AC300 Power Stations must be set up in the system.
An additional detail of the Bluetti power station is the integrated UPS system. This system ensures that when the power goes out, your devices can still be supplied with power. When the power drops to an unstable rate, it will be detected in the BMS system and the AC300 Power Station Combo will supply the correct amount of power to whatever is currently connected to the power station.
Key Features of the Bluetti AC300 Power Station with B300 battery
- 3,000W AC Pure Sine Wave Inverter (6,000W Surge)
- 3,072Wh Capacity (Expandable w/ up to 4 × B300 for 12,288Wh)
- LiFePO4 Battery with 3,500+ Life Cycles to 80%
- 240V Split Phase Bonding
- 24/7 UPS Home Backup
- 7 Ways to Recharge (AC/Solar/Car/Generator/Lead-acid Battery/Dual AC/AC+Solar)
- 2400W Max. Solar Input
- 5400W Max. Fast Dual Charging (Solar + AC)
Expand Your Power At Will
BLUETTI AC300 is 100% modular, supporting up to 4×B300 (3,072Wh per pack) battery modules for a groundbreaking capacity of 12,288Wh! Power your basic family needs for DAYS during emergencies or power outages!
3000W Pure Sine Wave Inverter
The inverter can adjust the charging rate from 1800W to 3000W via wall outlets according to your needs. * The AC input is 1800W by default, which can boost to 3000W with the 30A charging cable(Sold separately on BLUETTI).
5400W Blazing Input Rate
Plug in the wall outlet and solar panels, you can fast charge the AC300 much faster at a 5,400W Max rate, saving you a lot of charging time. *The 5,400W input rate combines 2,400W solar and 3,000W AC, which requires two B300 batteries. Or the rate would be limited to 3,000W with only one B300.
240V Connection Available
With the Fusion Box Pro(P030A), you can connect two AC300s in series for 240V/6,000W output and a total capacity of 24,576Wh(4 B300s for each AC300).
- MPN – BTAC300SET1
- GTIN – 9355832010347