Used Cactus RF60X Wireless Flash
Preloved: Used Cactus RF60X Wireless Flash
Condition:
Body Scuffs/Scratches – Some very light scuff marks from normal use
Has a 3-month digiDirect Warranty on the Flash
These images are of the actual product
We photograph almost every individual camera/Lens that we sell. You will receive the camera/lens in the photo. Please look at the pictures for the best information about their cosmetic condition.
This exceptionally clean, preowned Cactus Wireless Flash RF60X is a portable flash with a built-in wireless transceiver that supports high-speed sync / FP mode, AF-assist and an exclusive Cooling Mode. Built-in wireless commander and slave The Cactus RF60X is a 2.4GHz radio-based wireless portable flash with a built-in transceiver on 16 channels. It operates in three modes: Local for on-camera operation and Master and Slave modes for off-camera. To act as a commander, set an RF60X to Master, and it can trigger an unlimited number of RF60X set in Slave mode. The effective distance between the RF60X Master and RF60X Slave is 100m (328 feet).
Key Features of the Used Cactus RF60X Wireless Flash
- Automatic wireless HSS support in Slave mode for Canon, Fujifilm, Nikon, Olympus, Panasonic, and Pentax when working with V6 II; and Sony with V6 IIs transceiver;
- Zoom Range: 24-105mm
- Tilts from -7° to 90°
- Rotates Left & Right 180°
- Built-in wireless commander and slave – runs on 16 channels;
- Runs on AA Batteries x4 (Supplied)
- The guide number at the 35mm zoom position is 56m at ISO 100
- Optical slave – captures pre-flash or main flash signals for flash triggering;
- Optical slave – captures pre-flash or main flash signals for flash triggering;
- Compatible with Cactus transceiver – including Cactus V6, V6II and V6 IIs;
- Thermal cut-out protection shuts off the flash to prevent damage from overheating.`
- Flash exposure compensation from -3 to +3 EV in 1/3 EV steps
- Backlit LCD panel
- AF-assist light, modelling illuminator, monitor pre-flashes, and test firing settings
- Hot Shoe with locking collar.
- Supplied with case and Flash stand.
Automatic wireless HSS support:
When triggered by a Cactus V6 II / V6 IIs, the RF60X supports high-speed sync (HSS) / focal plane (FP) mode, typically found on a TTL flash. Controlled from the V6 II / V6 IIs transmitter, the user can select between Normal HSS, the typical longer pulsing flash with lower power outputs, or Power Sync, which boosts flash power.
Quick recharge time:
After firing at full power, the flash can be recycled as quickly as 1.9 seconds.
AF-assist light:
Unlike most other portable flashes on the market, the RF60X’s AF-assist Light can also function as an off-camera flash in Slave mode. The Cactus V6 II turns on the AF-assist Light automatically, illuminating your subject and providing extra light to help the camera lens focus. This is especially useful as the flash is usually placed closer to the subject than the camera.
Cooling mode:
By intelligently regulating the recycle time, the RF60X runs cool all the time. This industry-exclusive feature allows the flash to sustain a steady performance even after consecutive full-power flashes. You can now shoot without the restriction of an overheating cut-off.
Optical Slave with delay feature:
The RF60X has a built-in optical sensor. The sensor captures pre-flash signals that are emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60X to do not only first-curtain and second-curtain sync (also referred to as front and rear curtain) but to fire at any given point of the image.
Note: the backlit LCD screen still has the original plastic protective sheet attached.
- MPN – CA-DICFLACACRF60X-PL
- GTIN – TBA
